Google Professional-Cloud-Network-Engineer 認定試験の出題範囲:
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
参照:https://cloud.google.com/certification/cloud-network-engineer
Google Professional-Cloud-Network-Engineer 試験概要:
| 認定ベンダー: | Google Cloud |
|---|---|
| 試験名: | Professional Cloud Network Engineer |
| 試験番号: | Professional-Cloud-Network-Engineer |
| 受験料: | 200米ドル(税別) |
| 試験時間: | 120 分 |
| 合格点: | 公表されていません |
| 認定の有効期間: | 2年間 |
| 対応言語: | 日本語, 英語 |
| 出題数: | 50~60問 |
| 試験形式: | 択一選択式, 複数選択式 |
| 関連資格: | Google Cloud 認定資格 - Associate Cloud Engineer Google Cloud 認定資格 - Professional Cloud Architect |
| 推奨トレーニング: | 公式試験ガイド Google Cloud トレーニングコース |
| 受験申し込み: | Google Cloud 認定資格 受験登録 |
| サンプル問題: | Google Professional-Cloud-Network-Engineer サンプル問題 |
| 受験方法: | オンライン監視付き受験方式、または認定試験会場での受験方式から選択できます。 |
| 前提条件: | 必須の受験資格は設けられていません。推奨される経験として、業界での実務経験3年以上、およびGoogle Cloudのネットワークソリューションの設計・運用経験1年以上が挙げられます。 |
| 公式シラバスのURL: | https://cloud.google.com/learn/certification/cloud-network-engineer |
Google Cloud Certified - Professional Cloud Network Engineer 認定 Professional-Cloud-Network-Engineer 試験問題:
問題 #1
You have a storage bucket that contains two objects. Cloud CDN is enabled on the bucket, and both objects have been successfully cached.
Now you want to make sure that one of the two objects will not be cached anymore, and will always be served to the internet directly from the origin.
What should you do?
A. Add an appropriate lifecycle rule on the storage bucket containing the two objects.
B. Create a new storage bucket, and move the object you don't want to be checked anymore inside it.
Then edit the bucket setting and enable the private attribute.
C. Ensure that the object you don't want to be cached anymore is not shared publicly.
D. Add a Cache-Control entry with value private to the metadata of the object you don't want to be cached anymore.
Invalidate all the previously cached copies.
問題 #2
Your organization has a critical project that requires a highly secure connectivity tunnel attached to the on-premises network. A Google Cloud network availability of 99.99% must be maintained.
The on-premises network has one device and two interfaces, each with their own external IP addresses. You need to configure the appropriate Cloud HA VPN to address the project requirements. What should you do?
A. Configure an HA VPN gateways with two VPN tunnel interfaces that connect to the on-premises device interface 0 and interface 1. Peer each tunnel to each external IP address. Set the REDUNDANCY_TYPE to SINGLE_IP_INTERNALLY_REDUNDANT.
B. Configure an HA VPN gateway with one VPN tunnel and two interfaces that connect to the on- premises device interface 0 and interface 1. Peer each tunnel to each external IP address. Set the REDUNDANCY_TYPE to TWO_IPS_REDUNDANCY.
C. Configure an HA VPN gateway with one VPN tunnel and two IP addresses that connect to the on- premises device interface 0. Use Cloud Router BGP MED and AS_PATH attributes to define redundancy with the on-premises device.
D. Configure an HA VPN gateway with two VPN tunnel interfaces that connect to the on-premises device interface 0 and interface 1. Peer each tunnel to each external IP address. Set the REDUNDANCY_TYPE to TWO_IPS_REDUNDANCY.
問題 #3
You want to set up two Cloud Routers so that one has an active Border Gateway Protocol (BGP) session, and the other one acts as a standby.
Which BGP attribute should you use on your on-premises router?
A. AS-Path
B. Multi-exit Discriminator
C. Local Preference
D. Community
問題 #4
You have deployed a new internal application that provides HTTP and TFTP services to on- premises hosts. You want to be able to distribute traffic across multiple Compute Engine instances, but need to ensure that clients are sticky to a particular instance across both services.
Which session affinity should you choose?
A. None
B. Client IP, port and protocol
C. Client IP
D. Client IP and protocol
問題 #5
You are designing a Partner Interconnect hybrid cloud connectivity solution with geo-redundancy across two metropolitan areas. You want to follow Google-recommended practices to set up the following region/metro pairs:
(region 1/metro 1)
(region 2/metro 2)
What should you do?
A. Create a Cloud Router in region 1 with one VLAN attachment connected to metro1-zone2-x.
Create a Cloud Router in region 2 with one VLAN attachment connected to metro2-zone2-x.
B. Create a Cloud Router in region 1 with one VLAN attachment connected to metro1-zone1-x and one VLAN attachment connected to metro1-zone2-x.
Create a Cloud Router in region 2 with one VLAN attachment connected to metro2-zone1-x and one VLAN attachment to metro2-zone2-x.
C. Create a Cloud Router in region 1 with two VLAN attachments connected to metro1-zone1-x.
Create a Cloud Router in region 2 with two VLAN attachments connected to metro1-zone2-x.
D. Create a Cloud Router in region 1 with one VLAN attachment connected to metro1-zone1-x.
Create a Cloud Router in region 2 with two VLAN attachments connected to metro2-zone2-x.
解説:
| 問題 #1 正解: D | 問題 #2 正解: D | 問題 #3 正解: B | 問題 #4 正解: C | 問題 #5 正解: B |














1068 お客様のコメント
品質保証JPexamはIT認定試験のシラバスに従って、試験問題の範囲を正確に絞って、的中率が99%の最新問題集を捧げます。
1年間の無料更新サービスJPexamは1年以内に問題集の無料更新サービスを提供し、お客様がいつでも最新版の問題集を持つことを保証いたします。もし試験の内容が変更されたら、弊社は直ちにお客様にお知らせします。それに、弊社の問題集が更新されたら、早速メールで最新バージョンを送付いたします。
全額返金JPexamの問題集を利用すると、短時間で勉強しても試験に合格できるのを保証いたします。試験に不合格になってしまった場合、弊社は全額返金いたします。(
ご購入前のお試しJPexamは問題集のサンプルを無料で提供いたします。ご購入前にサンプルを試用して製品の品質を確認することができます。ご遠慮なく利用してください。
